Skip to main content

Find your ring size

Sizing by ring line

Elements

Elements sizing matches a classic 5 mm wide band. If you know your size in such a band, simply choose the same one. If your measurement falls between two sizes, we recommend the larger.

View collection

Measure your finger

  1. You will need a flexible tape measure or a piece of string.
  2. Wrap the tape or string snugly around the base of the finger you will wear the ring on. If you wear several rings on one finger, measure exactly where they will sit. Mark with a pen the point where the ends meet.
  3. Lay the string flat, measure the marked section with a ruler (in millimetres) and compare the result with the size chart below. If you are between sizes, choose the larger one.

Using an existing ring

Method 1: with a ruler

  1. Pick a ring that fits the chosen finger comfortably and lay it flat on a table.
  2. Hold a ruler against it and measure the inner diameter: the distance between opposite edges of the opening, from the inside of the band to the inside on the other side. Measure across the widest point, without including the thickness of the metal.
  3. Compare the result in millimetres with the “Diameter” column in the size chart below. If you are between sizes, choose the larger one.

Method 2: with the on-screen tool

  1. Pick a ring that fits the chosen finger comfortably.
  2. Calibrate your screen using a payment card and the tool below.
  3. Lay the ring on the circle and match the circle to its inner opening – your size will appear alongside.

Size chart

Size (PL)Circumference (mm)Diameter (mm)
74715
84815.3
94915.6
105015.9
115116.2
125216.6
135316.9
145417.2
155517.5
165617.8
175718.1
185818.5
195918.8
206019.1
216119.4
226219.7
236320.1
246420.4
256520.7
266621
276721.3
286821.6
296922
307022.3

Frequently asked questions

What if I am between sizes?

Our size chart assumes a standard band 5 mm wide. A narrower band sits looser, so for bands under 5 mm we recommend one size smaller than usual; a wider band sits tighter, so for bands over 5 mm we recommend one size larger. Each ring line has its own note on this page: Elements fits true to size, Spike and Colorful Eternity one size smaller, and Spike Wide one size larger. If you are still between sizes, choose the larger one or contact us before ordering.

How do your ring sizes relate to circumference and diameter?

Our sizes follow the scale used in Poland: the size number is the inner circumference in millimetres minus 40. For example, size 14 has an inner circumference of 54 mm and an inner diameter of about 17.2 mm. Our size chart shows both values.

How do I measure my ring size at home?

A strip of paper or a sewing tape measure is all you need. Wrap it around the base of your finger without squeezing it, then mark where the ends meet. The length in millimetres is the circumference of your finger; divide it by 3.14 to get the diameter. You can compare both measurements with the size chart on this page.

Can I use an existing ring to find my size?

Yes. Measure the inner diameter of the ring in millimetres with a ruler and find that value in the size chart. You can also use the on-screen sizer above the size chart.

Can I exchange a ring for a different size?

Yes. You can exchange a ring for a different size within 14 days of receiving your parcel. Simply send it back to us; once we have checked that it shows no signs of wear, we will prepare the ring in the right size and ship it to you free of charge. The free exchange is available once. You only cover the cost of sending the ring back to us. Depending on the design, we either resize the ring you received, which takes about 2 weeks, or, if the model's construction does not allow it, make a new one. In the second case it takes 21–28 working days, as with any order. An exchange does not extend the 14-day period for withdrawing from the contract, which runs from the day you received the first parcel. If you are considering a return instead of an exchange, please tell us within that period. The exchange does not apply to engraved pieces or pieces made to individual specifications. If you are not sure of your size, we recommend ordering the ring without an engraving and having it engraved later by a local jeweller. Full terms are in our returns policy.

Fadaria emails

Sign up for Fadaria emails and be the first to hear about new designs and collections.

By clicking Sign up, I consent to Fadaria processing my email address to send me emails about new designs and collections, in accordance with the Fadaria privacy policy. I can unsubscribe at any time.

Fadaria is a designer jewellery studio. We design rings and wedding bands with clean lines and exact proportions. Expressive geometry and considered colour, refined for daily wear.

Our designs take shape in solid 18-karat (750/1000) gold and 925 sterling silver. They are made by experienced manufacturers in Poland and Germany.

Every piece begins with an original design. Only then do we choose the metal, the stones and how it will be made, so that the form keeps its character for years.

Our story

Solid 18-karat (750/1000) gold and sterling silver

Fadaria designs are made in solid 18-karat (750/1000) gold or 925 sterling silver, hallmarked in line with Polish assay law. Each product page identifies its stones.

Certificate of authenticity

Every piece comes with a serial-numbered certificate you can verify online.

Original designs

Our collections are developed according to the creative vision of Maciej Krawczyk.

Complimentary delivery in Poland

We offer complimentary, insured delivery throughout Poland.